KNIGHT MFG

Screen racks hold two 18 X 20 screens neatly organized beside the press while they are not on the platen. All steel construction with oak "shelves". Available in red, blue, black, and green. Custom colors available by special order.

$42.00 plus S&H.

Screen rack shown with two screens in place.

New kickleg clamps allow the use of a kickleg without having to drill a hole in your screen. Works with wood or aluminum screens. Available in assorted colors for $19.99. plus S&H  (Clamp only. Kickleg not included.)

Kickleg clamp with wooden kickleg attached. Custom cut your kickleg to fit your press from pine or poplar 1X2.

Our new screen clamps.

Building your own press from a set of our plans or to your own specifications? Then you'll need a good quality set of screen clamps to hold your screen while printing. These are our own new screen clamps which come as standard equipment on all of our new presses. These extra heavy duty channel type clamps  are made from 1/8" thick press brake formed steel plate. They have large diameter clamp heads that won't damage your screens which are tightened down with 3/8" T-handle bolts. They pivot on extra beefy door hinges for long lasting durability and once the screen is clamped in place they have very little to no play allowing you to hold very tight registration. And unlike most of the cast type "Jiffy Clamps" on the market, these won't get stuck wedged in the "clamped shut" position causing you to have to pry the top clamp loose with a flat head screwdriver to get your screen out when you're done printing. Anyone who has worked with those type clamps has experienced that hassle and knows exactly what I'm talking about. With these, you just loosen the t-handles and the screen comes out easily every time. Will accommodate screens with 1 inch to 1-3/4 inch frames. $38.00 pair plus S&H

Available in assorted colors.